Add the MPXY MM source driver for forwarding RPMI Management Mode
requests through the MPXY request-forwarding bridge.
The driver:
- Registers the `opensbi,rpmi-mpxy-reqfwd-mm` FDT-compatible source.
- Defines MM service metadata for get attributes and communicate services.
- Builds request-forwarding responses for MM GET_ATTRIBUTES and
COMMUNICATE requests.
- Handles MM response completion and copies response payloads back to the
source buffer.
- Extracts and stores the MM shared-memory address and size from the
GET_ATTRIBUTES response.
- Registers the MM source with the Management Mode RPMI service group.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Oza Pawandeep <pawandeep.oza@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20261118215549.2499040-5-pawandeep.oza@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Introduce an FDT-configured MPXY RPMI bridge driver that enables
cooperative message passing between two SBI domains sharing the
same physical hart via domain context switching.
MPXY channels are registered at runtime when the named domains
appear via the domain registration notifier:
- src_ch: used by the source domain to send messages
- dst_ch: used by the destination domain to retrieve and
complete forwarded messages via RPMI REQFWD service group
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Oza Pawandeep <pawandeep.oza@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20261118215549.2499040-4-pawandeep.oza@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SpacemiT K3 has 16 harts split across four clusters, with eight X100
harts in C0/C1 and eight A100 harts in C2/C3. Only hart 0 is powered at
reset, so secondary harts cannot reach the OpenSBI warm-boot path until
the platform removes their PMU power-down votes and wakes them.
Add a start-only HSM backend which performs those operations for the
requested hart. This lets the common HSM state machine start secondary
harts on demand instead of waking every hart during cold boot.
Select the HSM backend from the root compatible, preserving K1's
existing start and stop behavior.
The Boot ROM maps the audio buffer region as I/O although later firmware
uses it as normal memory. Restore its cacheable PMA attribute and mark
the XIP region as I/O before enabling caches. The boot hart performs the
per-hart setup during early platform discovery, while secondary harts do
the same in their assembly entry before reaching common warm-boot code.
This also enables MISA.H on X100 before common code selects its trap
entry; A100 does not implement H. Fence the PMA and guest translation
changes before continuing.
Use assembler-safe constants shared by the C and warm-entry assembly
paths. Since K1 and K3 are RV64-only, omit the SpacemiT platform objects
from RV32 generic builds.
Program the four cluster warm-boot vectors once and enable CCI-550 snoop
and DVM requests before any secondary hart is started.
Signed-off-by: Xianbin Zhu <xianbin.zhu@linux.spacemit.com>
Tested-by: E Shattow <e@freeshell.de>
Co-developed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20261028-spacemit-k3-v6-5-01d984f60941@linux.spacemit.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a simple SpacemiT I2C driver for basic byte transfers over the I2C
bus, prioritizing simplicity over performance. The driver operates in
PIO mode and does not use interrupts, FIFO, or DMA.
The controller is reset at the start of each transaction to ensure a
known initial state, regardless of prior configuration by the kernel.
This also avoids the need for additional error recovery code.
This will be used for communication with onboard PMIC to reset and
power-off the board.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20260419150857.2705843-2-aurelien@aurel32.net
Signed-off-by: Anup Patel <anup@brainfault.org>
Implement a system-wide suspend driver for the Andes AE350 platform.
This driver supports Andes-specific deep sleep (suspend to RAM) and
light sleep (suspend to standby) functionalities via the ATCSMU.
The major differences between deep sleep and light sleep are:
- Power Domain and Resume Path: Deep sleep powers down the core domain.
Consequently, harts waking from deep sleep resume from the reset
vector. Light sleep utilizes clock gating to the core domain; harts
maintain state and resume execution at the instruction immediately
following the WFI instruction.
- Primary Hart Wakeup: In both modes, the primary hart is woken by
UART or RTC alarm interrupts. In deep sleep, the primary hart is
additionally responsible for re-enabling the Last Level Cache (LLC)
and restoring Andes-specific CSRs.
- Secondary Hart Wakeup: In light sleep, secondary harts are woken
by an IPI sent from the primary hart. In deep sleep, they are
woken by an ATCSMU hardware wake-up command. Furthermore,
secondary harts must restore Andes-specific CSRs when returning
from deep sleep.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Link: https://lore.kernel.org/r/20251229071914.1451587-6-ben717@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Refactor ATCSMU (System Management Unit) support by moving it from a
system utility into a dedicated FDT-based HSM driver.
Key changes include:
- Moving the functions in lib/utils/sys/atcsmu.c into the new HSM driver
- Moving hart start and stop operations on AE350 platform into the new
HSM driver
- Converting the assembly-based functions in sleep.S to C code for the
readability
- Updating the ATCWDT200 driver
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Link: https://lore.kernel.org/r/20251229071914.1451587-2-ben717@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Initial platform support for ESWIN Computing EIC7700 based on public SoC
datasheet[1] and tested on HiFive Premier P550. Vendor U-boot/Linux boots
fine, and I've tested Geekbench 6.5.0 Preview and got scores on par with
the vendor OpenSBI. System shutdown/reboot for HiFive Premier P550 and
other boards will be implemented in subsequent commits. At this point,
only SoC-level warm reset is implemented.
The files and functions are intentionally named as eic770x in many places
for future enhancements to support the 2 die version of the same SoC,
namely EIC7702, seen on DC-ROMA AI PC FML13V03 [2]. This patch set only
deals with the single die version, and the assumption is we can be either
die with id=0 or id=1, but there's only a single die in the system, or we
are only using a single die out of 2. However, the way the SoC handles 2-
die greatly affects how we configure it in a 1-die setup. EIC770X address
map has die 0/1 memory regions interleaved (see comments in eic770x.c).
If only 1 die is connected or active, it creates holes in the address map
for those regions corresponding to the remote die. When speculative-
execution or HW prefetcher touches data-cacheable regions that happen to
fall into those holes, it can trigger bus error. Specifically:
- Remote (non-existent) die L3 zero device
- Remote (non-existent) die cached memory region
- Other holes in Memory Port
To make matters worse, EIC770X doesn't have cache coherent DMA, and due
to the fact that the P550 core lacks Svpbmt, the SoC maps main memory
twice as different regions, so it can bypass cache and fetch the data
directly from memory. In address space, we have two memory regions, one
as cached, the other as uncached. Thus, we also need an extra PMP entry
to protect OpenSBI blob from the uncached window. To do this, platform
code requires single_fw_region, otherwise, we'll run out of PMP entries.
EIC770X also have several feature disable/enable CSRs accessible in M
mode. By default many core features such as speculation and HW prefetch
are disabled, and M mode software is responsible of enabling. Hence,
introduce 4 new build time tunable parameters to Kconfig, which reflects
the values get updated to those CSRs:
- ESWIN_EIC770X_FEAT0_CFG
- ESWIN_EIC770X_FEAT1_CFG
- ESWIN_EIC770X_L1_HWPF_CFG
- ESWIN_EIC770X_L2_HWPF_CFG
The default values are somewhat optimal for generic workloads. They are
dumped when running SiFive's vendor OpenSBI, and in addition, with my
own tuning to address the perf regression reported by drmpeg [3]
To build the firmware+u-boot blob, Use the following, and docs [4] for
testing it with UART boot without flashing:
make FW_TEXT_START=0x80000000 \
FW_PAYLOAD_OFFSET=0x200000 \
FW_PAYLOAD_PATH=u-boot-nodtb.bin \
FW_PAYLOAD_FDT_ADDR=0xf8000000 \
FW_FDT_PATH=u-boot.dtb
[1] https://github.com/eswincomputing/EIC7700X-SoC-Technical-Reference-Manual
[2] https://github.com/geerlingguy/sbc-reviews/issues/82
[3] https://forums.sifive.com/t/low-1-core-stream-bandwidth/7274/15
[4] https://github.com/ganboing/EIC770x-Docs/blob/main/p550/bootchain/UART-Boot.md
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251218104243.562667-6-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SiFive SMC0 controls the clock and power domain of the core complex
on the SiFive platform. The core complex enters the low power state
after the secondary cores enter the tile power gating and last core
execute the `CEASE` instruction with the corresponding SMC0
configurations. The devices that inside both tile power domain and core
complex power domain will be off, including caches and timer. Therefore
we need to flush the last level cache before entering the core complex
power gating and update the timer after waking up.
Reviewed-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Link: https://lore.kernel.org/r/20251020-cache-upstream-v7-12-69a132447d8a@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add RPMI based system suspend driver.
To test this, execute the follwoing in Linux:
$ echo mem > /sys/power/state
To wake up, execute the following command on qemu monitor terminal:
(qemu) system_wakeup
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple system suspend drivers so add a
simple FDT based system suspend driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add RPMI based driver for system reset and enable it in the generic
platform defconfig
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RISC-V Platform Management Interface (RPMI) defines a messaging protocol
and shared memory based transport for bi-directional communication with an
on-chip or external microcontroller.
To support RPMI in OpenSBI, add:
1) The RPMI messaging protocol defines and helper macros
2) A FDT mailbox driver for the RPMI shared memory transport
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
SG2042 uses an onboard MCU to provide reset function.
Add reset driver to support this onboard MCU.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the past, we used fdt_reset_thead to help customers with prototype
verification. However, with the emergence of the Big-little SoC system,
it can no longer meet the demand. Therefore, we use zero_stage_boot
instead of fdt_reset_thead. It cleans up the opensbi code and ends the
disputation of reset_sample's dts.
This patch removes the fdt_reset_thead component and updates the related
doc.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The TLB entries remain functional all the time once added in T-HEAD th1520
and Sophgo sg2042 (even if the MMU is then disabled afterwards). If there
are some stale TLB entries that contains the address of SBI, it will cause
unexpected memory access and issue a illegal instruction error. To avoid
this, a TLB flush is needed to drop these TLB entries before any memory
access in the trap handler.
To handle this workaroud, add a custom trap handler with executing TLB flush
first in the T-HEAD platform to fix affected socs.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The functionality of SiFive Test reset driver is easily available
through Syscon reset driver so let us remove the SiFive Test driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>