CSR_PMPADDRn lower bits may read all-0 or all-1, depending on
the configuration. For TOR it is all-0, for NAPOT - all-1.
Thus if PMP entry was pre-configured as NAPOT, original code would
stop scanning because value read back not equal to the written one.
Mask lower bits before comparison to fix this
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
MENVCFG access will be used as well for double trap, landing pad and
shadow stack fwft support. Factorize that in a common function.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
In case the double trap handler is called and the double trap happened
in supervisor mode, send a double trap SSE event.
NOTE: this commit depends on the ratification of the new SSE event
id for double trap [1].
Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add Ssdbltrp trap handler support for S-mode double trap handling. If
the trap is received while in VS-mode, then the trap is redirected to
S-mode. If caught while in HS-mode, then an error is returned to the top
trap handler which will panic.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Previous privilege mode retrieval from mstatus is done at different
places, factorize it rather than copy/pasting it again.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The same pattern is used at multiple places to verify in which mode
the exception was actually taken. Factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The per-domain hartindex_to_context_table[] is yet another per-domain
data required for implementing hart entry into (or exit from) domain.
Use the recently added domain data support for per-domain hart context
so that a dedicated hartindex_to_context_table[] in struct sbi_domain
is not needed.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Different parts of OpenSBI require their own per-domain data so
introduce domain data (or sbi_domain_data) which can be registered
by any part of OpenSBI. Using the domain data, the domain framework
will create a data pointer for every domain which can be used to
maintain some per-domain state.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
The sbi_domain_context.h includes sbi_domain.h and the sbi_domain.h
also includes sbi_domain_context.h. Remove this cyclic include in
sbi_domain_context.h.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Use sbi_domain_memregion_init() at the time of parsing domains from
FDT so that sbi_domain_memregion_init() is always used for setting
up all memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memregion() is only used within sbi_domain
implementation so rename and make it a local function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update APLIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update IMSIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update ACLINT mswi driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Since commit 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in
IPI framework"), The .ipi_clear callback functions take a hart index,
not a hartid. However, these warm_init functions were never updated.
Fixes: 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
All callers already have the hartindex available, so this removes a
hartid to hartindex conversion.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes redundant hartid to hartindex conversions from four call
sites and provides a net reduction in code size.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes several hartid/hartindex conversions, as well as two loops
through the mask for broadcast IPIs.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes some hartindex conversions in sbi_system_suspend(), but is
mostly intended to support refactoring sbi_hsm_hart_interruptible_mask()
to work exclusively with struct sbi_hartmask.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Use the IPI .update callback to exclude the local hart. This allows
reusing the normal logic for broadcasting an IPI to all active harts.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This simplifies the logic so that sbi_hsm_hart_interruptible_mask() is
only called from one place (sbi_ipi_send_many()). A minor functional
change is that the legacy functions can now affect more than XLEN harts
when targeting all harts.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This avoids needing to map the target hartid to a hart index when
enabling or disabling an event, and provides a net code size reduction.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This avoids calls to the expensive sbi_hartid_to_hartindex() function
and also makes the firmware smaller.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This check has been obsolete since commit c51f02cf14 ("include:
sbi_platform: Introduce HART index to HART id table"). It originally
filtered out harts that were disabled in the FDT, but those harts are
omitted from the hart_index2id table, so they will hang in fw_base.S
after the "Find HART index" loop and never enter sbi_init().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Supervisor software can enable control flow integrity features for itself
using fwft feature `SBI_FWFT_LANDING_PAD` and `SBI_FWFT_SHADOW_STACK`.
This patch implements the mechanism to enable both these fwft.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
zicfiss and zicfilp introduces new exception (cause=18). Delegate this
exception to S mode because cfi violations in U / S will be reported
via this exception.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
This patch adds support to check for zicfilp / zicfiss extension.
zicfilp record status of hart's ELP state in *status csr. Missing landing
pad sets MPELP in mstatus. When SBI is redirecting back to S/VS/HS, SPELP
is set in sstatus/vsstatus.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add support for controlling the pointer masking mode on harts which
support the Smnpm extension. This extension can only exist on harts
where XLEN >= 64 bits. This implementation selects the mode with the
smallest PMLEN that satisfies the caller's requested lower bound.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Writes to the low half CSR should not affect the high half of the value.
Make this separation explicit by writing to the delta in memory as two
adjacent XLEN-sized values.
Fixes: 1e9f88889f ("lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes the compile-time limit on the number of domains. It also
reduces firmware size by about 200 bytes by removing the lookup table.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In `csr_read_allowed` and `csr_write_allowed` macros, has already
converted second param to `ulong`. So delete redundant `ulong`
where uses csr_read/write_allowed macros.
Signed-off-by: Zhang RunMin <runmin.zhang@ingenic.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The domain_support.md documentation states that "the HART to domain instance
assignment can be parsed from the device tree using *optional* DT property
opensbi-domain in each CPU DT node". However, the current implementation does
not treat this parameter as optional when determining which HARTs to assign to
a freshly discovered domain from the device tree, causing an effect where every
HART in the system must be explicitly assigned to a domain only if a domain is
specified in the device tree. Instead, this patch simply ignores CPUs that do
not specify a domain, and does not attempt to assign them into the recently
discovered domain.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This parameters was a remnant of a previous version, remove it now that
it is unused.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
